Condulet Conduit Bodies – Cast Iron or Aluminum
Applications:
Conduit outlet bodies are installed in conduit system to
Act as pull outlets for conductors being installed
Provide openings for making splices and taps in conductors
Connect conduit sections
Provide taps for branch conduit runs
Make 90 bends in conduit runs
Provide for access to conductors for maintenance and future system changes
Features:
Conduit Outlet Bodies
Form 7 Condulet outlet bodies approach conduit in size for neat, compact installations
Form 8 and Mark 9 bodies provide more room for heavier conductors
Many shapes and sizes are available for rigid threaded conduit for complete listings see page 6-12
Conduit hubs have tapered treads and feature integral bushings for protection of wire insulation
Form 7 has exclusive snaptight and wedgenut cover attachment to provide clear, unobstructed cover opening
Build-in rollers on all Form 5 1¼” to 4”C and LB bodies to facilitate wire pulling
Series 5 bodies available in optional configuration with set screws on hubs for EMP conduit (add suffix –MT to catalog number)
Gaskets
Solid gaskets:
Are used with blank covers
For Mark 9 and Form 5, can be converted to open type gaskets by tearing out center section along scored lines – ½ to 2 sizes
For Form 7 are used with all covers
Open gaskets:
For Form 8 – ½ to 4 sizes
For Mark 9 – 2 ½ to 4 sizes
Blank Covers
Stainless steel cover screws are standard on Form 7, Form 8, Mark 9, Series 5 and Form 5 covers.
Form 7
Wedge nut design facilitates installation and removal. Nuts and held captive in cover. Covers can be used with or without gaskets. SNAPTIGHT Form 7 Covers with integral sealing gaskets are installed without the use of screws, reusable.
Form 8
Two cover screws provided on all sizes to provide tight cover and gasket assembly. Feraloy iron alloy covers have dome shapes for added strength and extra wiring room.
Mark 9
Self-retaining cover screws.
Certifications and Compliances:
Outlet Bodies –
UL Standard: 514B
Fed. Spec.: W-C-586D
CSA Standard 22.2 No. 18
NEMA 3R Raintight (when installed with cover and gasket)
Standard Materials:
Form 7, Form 8 outlet bodies – Feraloy iron alloy
Mark 9 outlet bodies – copper – free aluminum
Form 5 – malleable iron
Series 5 – die cast aluminum
Standard Finishes:
Form 7, Form 8 outlet bodies – electrogalvanized with aluminum acrylic paint
Mark 9 outlet bodies – natural
Form 5 – electrogalvanized with aluminum acrylic paint
Series 5 – Aluminum acrylic paint
Options:
Description
Form 7 body and Cover Only:
Copper-free aluminum …… SA
Corro-free epoxy powder coat – external body only …… S752
Corro-free epoxy powder coat – internal and external …. S753
Series 5 in an EMT version with set screws on all hubs …… MT
Series 5 pre-packaged with neoprene gasket and cover …… CGN
