Condulet Single Gang Device Boxes – Cast Iron or Aluminum With and Without Mounting Lugs for Threaded and IMC Conduit.ondulet Conduit Bodies Cast Iron or Aluminum
Applications:
Cast devices boxes are installed to:
Accommodate wiring devices
Act as pull boxes for conductors in a conduit system
Provide openings to make splices and taps in conductors
Provide access to conductors for maintenance and future system changes
Connect conduit sections
FSY boxes for mounting surface devices on floor or bench (used with single gang covers)
Features:
Internal green ground screw standard on boxes
Suitable for use in wet locations when used with gasketed covers
Mounting lugs standard on most boxes
Tapered threaded hubs (NPT) with integral bushing
Available for surface mounting ( with mounting lugs) or flush mounting (without mounting lugs) as listed
Available as shallow (FS) or deep (FD) configuration. Use FD if device to be enclosed exceeds 1 5/8 in depth
Ample wiring room provided in either FS or FD configuration
Wide selection of surface or flush covers available in three materials ( sheet steel, Feraloy, aluminum)
Covers for flush mounting extend to conceal the rough plaster line
Available in single gang and multi-gang configurations with hubs, and as blank bodies for drilled and tapped openings
Certifications and Compliances:
US Standard: 514
ANSI Standard: C33.84
Fed. Spec.: W-C-5860
CSA Standard: C22.2 No. 18
Standard Materials:
Feraloy iron alloy or copper-free aluminum.
Standard Finishes:
Feraloy – electrogalvanized and aluminum acrylic paint
Aluminum – natural
