Arktite circuit breaking plugs and receptacles are created for next challenges:
– They can provide power to portative electrically operated devices (for example motorgenerator sets, compressors, heating and cooling units, welders, conveyors, lighting systems and so on).
– They are necessary at places, where temporary power is needed (for example at trailers, building units, heavy machinery and similar equipment and so on).
– They are necessary at places, where electrical loads must be quickly deenergized from the power source.
– They are necessary in a typical installation with a large machine utilizes, a number of electrical motor drives and for ease of regulation, moving, preventive repair and replacement, it’s better each motor will be connected by portable cord and Arktite receptacles.
– They are necessary for dust, dirt, moisture and corrosion areas.
– Also Arktite circuit breaking plugs and receptacles are essential devices for indoors and outdoors in non-hazardous areas of chemical plants, meat packing plants, process industry facilities, manufacturing plants and so on).
Arktite circuit breaking plugs and receptacles have next features:
– As for circuit breaking: plugs through 100 Amp rating can be deenergized under load. At the same time 150-400 Amp units are for service disconnect use only.
– Receptacles are created only for plugs of the same amperage rating, style and number of poles. It makes impossible to mismate, and also provides positive polarization.
– They have an extra wide electrical spacing, which allows maximum safety.
– Insulator materials of Arktite circuit breaking plugs and receptacles are the result of intensive testing. Selection was made relying on the highest dielectric strength, maximum mechanical and impact stamina, lowest moisture absorption and highest arc tracking stamina.
– The advantage is that a multiplicity of installations is available due to the applicability of several variants of back boxes.
– These circuit breaking plugs and receptacles were designed to withstand rough usage and the effects of harsh conditions.
– The Arktite devices have reversible interiors, 30, 60 and 100 Amp ( but except 30 and 60 Amp, 5-pole). Arktite plugs and receptacle interiors are interconvertable using a screwdriver. This makes possible to feed a normally deenergized receptacle from an energized plug with extra safety, at the same time no energized contacts are exposed.
Arktite circuit breaking plugs and receptacles have next certifications and compliances:
– They have next UL Standards: 1203*; 1682, 1686.
– They are CSA Standarded: C22.2 No. 182.1.
– CE (LVD) 2006/95/EEC**
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles are the best choice for big enterprises and work in hard conditions.
