The BUSSMANN KRPC800SP is s a low resistance resistor, which plays the role of oblation arrangement which was created to provide excess current proof, of both the load or source electric chain. Fuse’s an integral part is a wire yarn or streak that melts when too much current rate flows through it, breaking the circuit that it has connected. Short circuits, overloading, discordant loads or device failure are the prime causes for overflow amperage. The BUSSMANN KRPC800SP is a good alternative to circuit breakers.
Technical specifications:
This type of fuse is made from glass and melamine.
The series is KRP-C.
It also has time delay and current limiting.
The standards of this fuse are CE/UL-248-10 Guide JFHR/CSA Class 1422-02.
The body style of this item is bolt-on.
The class of the BUSSMANN KRPC800SP is L.
The diameter of the item is 2-15/64″.
Its length is 8-5/8″.
This item has bolted blade end X bolted blade end connection.
The fuse has dual element.
It has 800 fuse Amps.
The interrupt rating of this item is 300kA at 600VAC, 100kA at 300VDC.
This is a low voltage fuse. Its voltage rating is 600VAC/300VDC.
This type of the fuse is without indication.
Functionally, the BUSSMANN KRPC800SP is equal to Littelfuse KLPC or Mersen/Ferraz Shawmut A4BQ.
Also this device has RoHS Compliant.
It can be applied at large distribution panel-boards, large mechanical disconnecting switches, power switchboards.
Eaton’s Bussmann series of fuse are electrical safety products developed to provide inventive circuit and power electronics protection. The BUSSMANN KRPC800SP is very reliable and safe fuse, which can be a good helper on your enterprise.
