MO SERIES • FITTINGS
IRON AND ALUMINUM MOGUL CONDUIT BODIES
Suitable for wet locations when used with gasketed covers.
Federal Specification W-C-586D /A-A 50563.
Suitable for use in hazardous location applications when installed according to NEC Articles 501.10(b), Class I, Div. 2, (Suitable for use in Class I Zone 2 applications) 502.10, and 503.10.
FEATURES-SPECIFICATIONS
Applications
Mogul fittings are for use with rigid and IMC raceways
Use where standard conduit bodies do not provide adequate access and wiring area for the pulling of large and heavy conductors
For right angle bends where splices, pulls and taps are needed in a weather-proof chamber
Features
A raised dome cover permits additional wiring room
Furnished with captive ss screws and gasket
LBD, C and UB Series available with built-in cable-pulling rollers on sizes 1-1/2” and larger. Add -WR to catalog number. Example MOLBD-5-WR.
Material/Finish
Cast iron moguls are hot dipped galvanized
Aluminum moguls are of copper-free aluminum (less than 4/10 of 1%) with electrostatically applied powder coating
