The Burndy Unitap multiple tap connectors are super inspectable and insulated. They are created for tap connections. Also they are in-line splice/reductions easy and quick.
There are 7 different lines of Burndy Unitap multiple tap connectors.
#1. Direct Burial/Submersible Unitap Connectors
The first line is direct burial/submersible Unitap connectors, which were designed specially for direct burial applications.
They have next characteristics:
– They are UL 486D Listed and CSA Certified.
– They guarantee a comfortable way to join multiple conductors in direct burial applications.
– They are insulated with EPDM rubber;
– Also, this type of unitap connectors can be used for different applications, which require a below-grade or a water-tight application.
#2. Utility-Grade Submersible Unitap Connectors
The second line is utility-grade submersible unitap connectors. These connectors have black plastisol-covered aluminum bodies, which ensure conductivity and strength of the product.
They have next characteristics:
-They are fully tested to ANSI C119.4 for A-class connectors.
– ANSI C119.1, ANSI C119.4 and Western Underground Committee Guide 2.5.
#3. Mole In-Line Splice/Reducer
The third line is mole in-line splice/reducer. They are made from the specialized material that forms a specific water-tight connection and which is also rugged enough to withstand abrasions. This line may occur in direct-burial situations.
These devices are tailored exclusively for direct burial applications and are UL 486D Listed.
#4. Clear Unitap Connectors
The fourth line is clear unitap connectors. They are UL 486B Listed and CSA Certified. Clear unitap Connectors are Dual Rated AL9CU for stranded aluminum or copper applications.
They have next characteristics:
– Voltage: 600 volt.
– Temperature: 90°C.
#5. Insulated Multiple Tap Connectors
The fifth line is insulated multiple tap connectors. They have a lot of advantages, but the most useful are time-saving advantages.
They have next characteristics:
– They are pre-filled with oxide inhibitor.
– They are pre-insulated for fast installation.
– They are contaminant-free due to solid end caps.
– Also they are range-taking (now you have no need for connector inventory).
– They are dual Rated AL9CU for aluminum and copper applications.
– They have multiple configurations, which accommodate a variety of applications.
#6. Mounting Version for Unitap Connector Line
The sixth line is mounting version for unitap connector line. They are outfitted with two isolated mounting holes, which can hold up to ¼” standard hardware. The holes, which are located at both ends of the connector, permit for direct mounting to trough, gutter or wire way.
#7. UV-Rated Black Unitap Connectors
The seventh line is UV-rated black unitap connectors. These connectors are UV-rated. They have black plastisol-covered AL6061-T6 aluminum body, which saves your time, because there is no need for taping.
They have next characteristics:
– They are UL 486B Listed.
-They have dual rated AL9C.
– Voltage: 600 volt.
– Temperature: 90°C.
If you need them – you can get the on our website.
